CONTROLS WATER PUMP TO START & STOP DAILY AT FIX PRE-SET TIME ( i.e. THE TIME AT WHICH WATER IS SUPPLIED BY CORPORATION).

PUMP WILL STOP AUTOMATICALLY IF DURING THIS ‘RUN’ TIME, TANK GETS FULL OR PUMP RUNS DRY (NO INCOMING WATER).

IN CASE OF DRY RUN IT WILL AUTO RESET AFTER SOME FIX PREDEFINED TIME AND PUMP WILL START AGAIN TO CHECK IF INCOMING WATER IS AVAILABLE.

THIS AUTO REST WILL KEEP ON TRYING (AUTO RESETTING ITSELF AFTER EVERY FEW MINUTES) FOR THE AVAILABILITY OF INCOMING WATER TILL THE END OF PRESET TIME SLOT.

EASY PROGRAMMING: Very simple single flow programming. You have to program Time or clock, number of program (time slot) and on / off time for every program slot one by one step wise.

PROGRAM SLOT: 1 to 4 time slots can be programmed within 24 hours. This means that a device can be turned ON and OFF, for minimum 1 time and maximum of 4 times in single day. Only the required number of time slots needed to be programmed. BYPASS S/W: Used to bypass the system and turn ON the output

. AUTO STOP SIREN: Whenever output turns OFF, a buzzer will sound for 5 seconds.

ANY TIME START & STOP: A push button is provided to turn the output ON and OFF at any time.

DIGITAL CLOCK: A bright disply clock serves as a wall clock.

BATTERY BACKUP: In case of power failure, the programs and clock time will be preserved due to battery backup.

VERY USEFUL FOR NIGHT TIME WATER SUPPLY TIMES.